Regional Updates:
Enable DFS frequencies for US/Puerto Rico/ Canada for NanoStationM5/Loco M5/Rocket M5/Rocket M5 GPS/NanoBridge M5 models
Lock Indonesia country code: once selected at Login page do not allow to change country unless reset to defaults
Remove DFS enable/disable option for Austria, turn DFS ON after upgrade for Austria. Keep DFS enable/disable option for rest of EU countries
Regulatory rules update for India 2.4GHz band
Move Puerto Rico under US regulatory domain
Fixes:
Fix: AirMax: When one of the clients reboot all others are disconnected from AP
Fix: AirMax: Unexpected device reboots on high load/PTMP (possible fix)
Fix: Traffic shaping ingress rules on LAN port in some cases block Internet traffic
Fix: Traffic shaping bursting is increased to the maximum allowed value according to configured throughput limits
Fix: Association to non-broadcasting SSID CISCO AP takes couple minutes
Fix: Complex AP-repeater setup creates loop in this network
Fix: Increase Password attribute length to 18 when sending empty password to RADIUS server
Fix: Auto Channel selection logic improvement
Fix: DFS: Allow UNII-2 band for Canada w/o unlock key for approved product models
Fix: Traffic Shaper rules changes during upgrade from v5.3.5
Fix: PPPoE stops sending PPPoE Discovery packets on time change
Fix: NBM3/NBM365 should support 2 Ethernet ports but shows only 1.
Fix: Aggregated transmission problems with some Apple laptops and other devices
Fix: Clients can't reconnect to AP with WPA2-AES security reason (15)
Fix: After upgrade from v5.3.5 to v5.5 secondary Ethernet port isn't configured (running default configuration)
Fix: Stations disassociation because of returned broadcast packets on Ethernet interface
Fix: Second LAN port MTU max is 2024B not 1614B (affected all M series products)
Fix: No Internet connection for clients behind device in router mode
Fix: Access Point ignores Session-Timeout limit received from RADIUS server
Fix: Reduce false positives and misclassifications of invalid DFS radar events
Fix: Can't launch Airview when initial window disabled
Fix: Making changes in Network tab resets MTU to 1500 when Management VLAN is enabled
Fix: Incorrect ebtables VLAN drop rules
Fix: Do not allow to upload Configuration file from different Regulatory domain
Fix: Port Forwarding public port range issue
WEB UI: Show DFS status in MAIN page
WEB UI: airSync: Show correct default slots depending on channel size
WEB UI: Static route disappears in Router mode
WEB UI: Option to disable Multicast Enhancement for AP
WEB UI: Improved IP address validation
WEB UI: Don't enable "DMZ Management Ports" when DMZ is enabled (Router/SOHO Router)
WEB UI: Bridge table display problem. Table too big
WEB UI: Do not show graph for interface when it is not in use
WEB UI: Don't report TOUGHSwitch/airCam WLAN mode in device discovery results
WEB UI: Add Turkish language support
WEB UI: In Simple configuration mode LAN should be BRIDGE0 containing both Ethernet interfaces
WEB UI: Show the same antenna information in MAIN page as in Wireless settings page drop down
WEB UI: Site Survey Scan button is disabled under IE browser
WEB UI: Allow MAC Cloning for BRIDGE interface in Router mode
WEB UI: Bridge table is not displayed in Main page when there are multiple bridge
Security Improvements:
WEB UI: Default settings change: Enable HTTPS (port 443) by default
WEB UI: Removed admin.cgi functionality
WEB UI: Add option to disable HTTP service
WEB UI: Add reminder when using default admin user name/ password
ubnt
Download
update version 5.5.2cara
Update ubnt air os version 5.5.2
